Tips For Safer Electrical Repairs

When it comes to fixing electrical wiring, it is all about safety compared to all other household projects. If you install the outlet correctly and it is as safe as it can be; install it incorrectly and it can be deadly. That is why there are several rules that govern electrical wiring and installations. These rules can be complicated and even confusing at times, but there are basic practices and concepts that apply to nearly all electrical wiring project, especially the ones that DIYers can take care of. Provided below are some of the most important rules that can help keep you save whenever you are making repairs to your electrical system.

Test For Power

One of the best ways to prevent electrical shock is to test devices and wires for power all the time before you go near or work on them. Just shutting off the power is not good enough. Additionally, it is not uncommon for some circuit breaker boxes to be labeled incorrectly, especially when the electrical service has been adapted or extended over the years. The label on the circuit breaker might not correctly describe what the circuit breaker actually controls.

Check Amperage Ratings

All electrical devices and wiring have an amperage or amp rating. It is a maximum amount of electrical current that they can carry safely. The most standard household circuits have a rating of 15 amps or 20 amps, while circuits for large appliance can be rated for at least 30 amps or more. When replacing or installing wires and devices, all the parts you have to use must have the right amperage rating for the electrical circuit. When changing a light fixture, switch, or outlet receptacle, don’t forget to install a device that has more amperage rating than the circuit carries. This is especially true when changing receptacles.

Make Tight Wiring Connections

Electricity will travel along conductors like wires as well as the metal contacts of sockets and outlets. Tight connections between the conductors can make smooth transitions from one conductor to another. However loose connections can serve like speed bumps, limiting the flow and generating heat and friction. Extremely loose connections can result to arcing, wherein electricity jumps through the air from a conductor to another, which generates tremendous heat. You can stop fire hazards by ensuring that all wiring connections are tight and in full contact of the conductors being linked. When you are splicing wires together, you must use approved wire connections. Switches and outlet receptacles are usually made with push fit wire connection slots at its back, along with conventional screw terminal connections on the device’s side. The push fit connections are known for failing or loosening so professional North Myrtle Beach electricians almost always avoid them in favor of creating very secure and tight terminal connections.

If you need expert help with your electrical system, call NMB Electrician Pros right away.

NMB Electrician Pros
North Myrtle Beach, SC 29582
(843) 491-4489
http://nmbelectricianpros.com
info@northmyrtlebeachhomeservices.com

Circuit Breaker Troubleshooting Tips

If you are one of those homeowners who only have the time to check the circuit breaker when you tripped the circuits in your home and you need to reset it so the power will be restored. You need to know that a circuit breaker is an electrical safety device that does more than just turning on and off the power in your house.

One of the tasks of a circuit breaker is to protect the electrical wiring of your home from overheating. It is made to detect any electrical overload on the electrical wiring system. It is also designed to sense interruptions in the flow of electrical current. This safety device can help in stop electrical blowouts that can result in house fires and physical injuries. A lot of homeowners know the primary function of the circuit breakers. However, many of them have no idea how to fix the problems related to their circuit breaker.

Circuit breakers are made to prevent the flow of electrical current the moment a defect like a short circuit or an overload takes place. Provided below are some tips you need to remember when performing a checkup on your circuit breaker.

Identify The Tripped Circuit Breaker

The circuit breaker produces a humming sound if it is overloaded by has not been turned off yet. In the interior of your electric access panel, the tripped circuit breaker lever can be found between the on and off switch.

Test The Circuit Breaker

Inspect the lever by switching it from on to off a few times to determine how loose it is. In case your breaker has no give and is moving easily then it is defective. You have to replace it as soon as possible. Since this requires technical knowledge and experience, it is best to hire a professional electrician.

Turn Off All Appliances

Turn of all your appliances that are connected to the circuit breaker that’s currently having problems. In order to prevent a surge of electrical power once you reset the circuit breaker, you have to make sure that you switch off the appliance all at once. You also need to call a professional from NMB Electrician Pros in case the circuit breaker keeps on tripping.

Check The Wiring

In case your house has a faulty wiring, you can expect your circuit breaker to keep on tripping and might even find yourself experiencing electrical shocks whenever you turn on certain appliances. Don’t do this on your own. It is much better to hire a North Myrtle Beach electrician.

Test Circuit Breaker For Right Voltage

Place one problem of the volt tester to the hot wire’s tip, while making sure that the other tips touch the bare grounding wire in the main electrical box. Utilize the neutral grounding terminal, which will be secured with neutral and ground wires for the probe. You need to change your circuit breaker with a new one in case you determine that the correct amount of voltage present.

Any problem related to the circuit breaker can result in serious issues for your home and put your safety and that of your family at risk. Do not take any risk with your property or your life. Call NMB Electrician now.

NMB Electrician Pros
North Myrtle Beach, SC 29582
(843) 491-4489
http://nmbelectricianpros.com
info@northmyrtlebeachhomeservices.com

Signs You Need An Emergency Electrician

Electricity is not something you can play with. According to the U.S. Consumers Products Safety Commission said that at least 200 people die every year due to electrocution. Therefore, if you have an electrical emergency, or you feel that’s something is wrong with your electrical system, you need to hire an emergency electrician right away. Always remember that it is better safe than sorry. Provided below are five signs that you need to call a local emergency electrician for help.

Electrical Issue Lasts For More Than An Hour

In case you are having a persistent problem with a light source or perhaps an appliance for more than an hour, you might require preventative repairs performed by a certified electrician. Although it is not always an emergency, which in many cases it could be, so a quick response is required.
No Power

Car accidents and thunderstorm can cause blackouts. In those instances, an emergency electrician is not necessary. But if you call the power company that they say that there’s no outage in your area, you can be sure that the problem is with your home’s electrical system. You will surely need an emergency electrician from NMB Electrician Pros to address this situation for you.

Brown or Black Marks Surrounding Your Outlets

A blackened outlet implies that it might be overloaded and it is definitely hot. It can lead to burnt wiring that can cause a house fire, so be sure to call an electrician immediately after spotting brown or black marks.

Humming Coming From Your Breaker Box

Humming or loud buzzing from your breaker box usually means that there is poor wiring or perhaps a faulty breaker is ignoring the trip. This is very dangerous and you have to immediately call your local emergency electricians to prevent other electrical failures in your house.

Smells Like Something Is Burning

In case you smell burnt plastic as you are walking through your house, you might have damaged wires in your walls that can immediately cause a fire. In case it is safe to turn the power off to that area of your house, do so. You then need to contact a professional North Myrtle Beach emergency electrician to help you.

In case you notice the above signs in your house, you have to protect your family. Call NMB Electrician Pros now.

NMB Electrician Pros
North Myrtle Beach, SC 29582
(843) 491-4489
http://nmbelectricianpros.com
info@northmyrtlebeachhomeservices.com